♥ вυℓℓ∂υѕт η ∂яєαмz ♥

♥ Cutie Pie ♥

2012-02-11T09:41:00.000+11:00

♥ Cutie Pie ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, I purchased my tube through AMI, these tubes are no longer available there but you can buy them here if you would like to use her work.

Awesome Cutie Pie kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_310 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDcutiepie_element45 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open JDcutiepie_paper4, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDcutiepie_element3, resize 80%, arrange above main frame.

Copy & paste JDcutiepie_element28, place to the bottom of frame, duplicate, image, flip.

Copy & paste JDcutiepie_element70, resize80%, arrange to the left.

Copy & paste JDcutiepie_element49, resize 40%, arrange to the left in front of previous layer, duplicate, image, mirror &

place to the right, duplicate & arrange in the middle.

Copy & paste JDcutiepie_element34, resize 70%, place behind your tube.

Copy & paste JDcutiepie_element7, resize 45%, image, mirror & arrange to the top right.

Copy & paste JDcutiepie_element64, resize 35%, arrange to the left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Feena Casual. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 11th February 2012, any similarity to any other tutorial is purely coincidental!

♥ Who's That Girl? ♥

2012-02-04T10:30:00.000+11:00

♥ Who's That Girl? ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Creme de la Creme kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_315 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDcremedelacreme_element43 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RDcremedelacreme_paper9, resize 12%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDcremedelacreme_element21, resize 90%, arrange as bottom layer under main frame.

Copy & paste RDcremedelacreme_element78, resize 78%, arrange over the top of main frame.

Copy & paste RDcremedelacreme_element2, resize 40%, arrange to the left.

Copy & paste RDcremedelacreme_element34, resize 50%, arrange to the right.

Copy & paste RDcremedelacreme_element26, resize 30%, place to the right, above previous layer.

Copy & paste RDcremedelacreme_element28, resize 75%, arrange behind your tube.

Copy & paste RDcremedelacreme_element13, resize 25%, place to the left, duplicate.

Copy & paste RDcremedelacreme_element56, resize 40%, arrange to the lower right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Licorice. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 4th February 2011, any similarity to any other tutorial is purely coincidental!

♥ Cherish The Love ♥

2012-02-04T09:36:00.000+11:00

♥ Cherish The Love ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Cherish The Love kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_302 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDcherishthelove_element111 as new layer. Resize 90%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RDcherishthelove_paper5, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

I also added a different tube & placed below the frame layer & changed the blend mode to Luminance.

Copy & paste RDcherishthelove_element9, arrange over the main frame at the bottom. Duplicate & place at the top of frame.

Copy & paste RDcherishthelove_element3, resize 60%, arrange to the left.

Copy & paste RDcherishthelove_element42, resize 40%, arrange to the left above previous layer.

Copy & paste RDcherishthelove_element66, resize 65%, image, mirror & arrange to the right.

Copy & paste RDcherishthelove_element31, resize 28%, place to the bottom right.

Copy & paste RDcherishthelove_element44, make bottom layer, place to the top right, duplicate, image, mirror. Merge down, duplicate & flip, arrange at the bottom.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Ephesis. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 4th February 2011, any similarity to any other tutorial is purely coincidental!

♥ Pink Dreams & Tea Parties ♥

2012-02-03T14:24:00.000+11:00

♥ Pink Dreams & Tea Parties ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, I purchased my tube through AMI,

these tubes are no longer available there but you can buy them here if you would like to use her work.

Awesome Cuddles kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_259 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDcuddles_element85 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 5.

Open RDcuddles_paper1, resize 55%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDcuddles_element91, resize 85%, arrange over the main frame.

Copy & paste RDcuddles_element116, arrange to the bottom under main frame as bottom layer.

Copy & paste RDcuddles_element1, arrange behind your tube.

Copy & paste RDcuddles_element42, resize 70% & arrange behind tube to the right.

Copy & paste RDcuddles_element115, resize 40%, place to the bottom left.

Copy & paste RDcuddles_element99, resize 40%, place to the top right.

Copy & paste RDcuddles_element5, arrange along the bottom.

Copy & paste RDcuddles_element78, resize 30%, place to the left, duplicate, image, mirror & arrange to the right.

Copy & paste RDcuddles_element75, resize 40%, place to the left.

Copy & paste RDcuddles_element70, resize 30%, place to the lower right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Gasoline Alley. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 3rd February 2011, any similarity to any other tutorial is purely coincidental!

♥ Time Is The Essence ♥

2012-01-26T13:01:00.001+11:00

♥ Time Is The Essence ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Vintage Journey kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_260 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDvintagejourney_element69 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RDvintagejourney_paper4, resize 55%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDvintagejourney_element11, resize 60%, arrange to the right.

Copy & paste RDvintagejourney_element57, resize 90%, image, mirror & arrange to the bottom.

Copy & paste RDvintagejourney_element88, resize 50%, arrange to the top left. I erased some of the detail on the left of clock.

Copy & paste RDvintagejourney_element36, arrange behind tube to the top.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Glastonbury. I also added some words, noise & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 26th January 2012, any similarity to any other tutorial is purely coincidental!

Sad News :(

2012-01-05T12:01:00.000+11:00

I have just read in email that a wonderful lady by the name of Rieka has sadly passed on :( I absolutely loved working with her kits! Thankyou Rieka for allowing me to work with all your amazing kits ♥♥ Soar on Angel's Wing's ♥♥

♥ Subtle Intoxication ♥

2011-12-19T10:37:00.001+11:00

♥ Subtle Intoxication ♥

Supplies Needed
PSP X2 (any version will work)
Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.
Awesome Subtle Intoxication taggers kit by Scraps Dimensions, you can download it here at her blog, thankyou!
WSL_209 mask by Weescotslass here, thankyou!

Lets get started.
Open a new canvas 650x650.
Copy & paste SD SI FRAME 1 as new layer. Resize 58%.
Using your selection tool, select inside of frame, selections, modify, expand 10.
Open SD SI PAPER 8, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.
Select none & bring this paper layer below your frame.
Add your tube/s, doing this now gives you a better idea of placement for your other elements.
Copy & paste SD SI BEADED SWIRL 2, resize 60%, arrange to the left.
Copy & paste SD SI WA, resize 45%, place to the bottom.
Copy & paste SD SI SCATTERED SKULLS, resize 65%, arrange as bottom layer.
Copy & paste SD SI FLOWER 3, resize 18%, place in top right corner of frame.
Copy & paste SD SI SKULL HEART, resize 18%, arrange to the right.
Copy & paste SD SI SKULL POP, resize 40%, arrange to the left.
Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.
Apply mask, on your layers pallette merge mask group.
Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.
Add dropshadows of choice to each layer if preferred.
Add you name using font of choice, I used A & S Signwriter. I also added a gradient glow.
Add correct © info, crop & resize if needed. Save as a png.
Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 19th December 2011, any similarity to any other tutorial is purely coincidental!

♥ All I Want For Christmas ♥

2011-12-18T19:01:00.000+11:00

♥ All I Want For Christmas ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.

Awesome Classic Christmas kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_180 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDclassicchristmas_element18 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 3.

Open RDclassicchristmas_paper12, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDclassicchristmas_element1, resize 55%, arrange to the right.

Copy & paste RDclassicchristmas_element13, place along top of frame.

Copy & paste RDclassicchristmas_element37, resize 70%, arrange to the left.

Copy & paste RDclassicchristmas_element36, resize 30%, arrange to the left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Hurricane Swash. I added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 18th December 2011, any similarity to any other tutorial is purely coincidental!

♥ Santa, I've Been Good ♥

2011-12-18T16:40:00.000+11:00

♥ Santa, I've Been Good ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.

Awesome December Holidays kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_178 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDdecemberholidays_element73 as new layer. Resize 78%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RDdecemberholidays_paper9, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDdecemberholidays_element3, resize 80%, arrange around main frame as bottom layer.

Copy & paste RDdecemberholidays_element106, resize 85%, place to the left.

Copy & paste RDdecemberholidays_element114, resize 80%, arrange to the left.

Copy & paste RDdecemberholidays_element63, arrange as bottom layer.

Copy & paste RDdecemberholidays_element111, resize 55%, place to the right.

Copy & paste RDdecemberholidays_element44, resize 40%, image, mirror & place to the right above previous layer.

Copy & paste RDdecemberholidays_element90, resize 30%, image, mirror & place to the lower right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Santa's Sleigh Full. I added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 18th December 2011, any similarity to any other tutorial is purely coincidental!

♥ Let It Snow ♥

2011-12-18T10:47:00.000+11:00

♥ Let It Snow ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Winter Moods kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_209 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDwintermoods_element12 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RDwintermoods_paper2, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDwintermoods_element11, arrange around main frame as bottom layer, duuplicate, image flip.

Copy & paste RDwintermoods_element7, resize 40%, place to top right.

Copy & paste RDwintermoods_element48, resize 45%, arrange to the left.

Copy & paste RDwintermoods_element24, arrange to the bottom of frame.

Copy & paste RDwintermoods_element52, resize 35%, place to the top left.

Copy & paste RDwintermoods_element37, resize 48%, image, mirror & place to the right.

Copy & paste RDwintermoods_element39, resize 25%, place on top of the wheel.

Copy & paste RDwintermoods_element51, resize 60%, arrange behind fame but above paper layer.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Londonderry Air.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 18th December 2011, any similarity to any other tutorial is purely coincidental!

♥ Cosy Christmas Holidays ♥

2011-12-16T13:24:00.001+11:00

♥ Cosy Christmas Holidays ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Christmas Eve kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_260 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDchristmaseve_element9, resize 80%.

Copy & paste RDchristmaseve_element13, resize 80%, arrange to the right.

Copy & paste RDchristmaseve_element14 & RDchristmaseve_element50, resize 30%, arrange under the tree.

Copy & paste RDchristmaseve_element54, resize 50%, arrange to the left.

Copy & paste RDchristmaseve_element33, resize 60%, place to the top left. I added a gradiernt glow to help it stand out!

Copy & paste RDchristmaseve_element39, arrange to the top.

Copy & paste RDdreamsofaboy_element48, resize 60%, arrange to the top right, I added a gradient glow to help it stand out.

Copy & paste RDdreamsofaboy_element70, resize 18%, image, mirror & place in tree.

Copy & paste RDdreamsofaboy_element66, resize 30%, position at top left.

Copy & paste RDdreamsofaboy_element63, resize 50%, place behind your tube.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used CLB Christmas Base. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 16th December 2011, any similarity to any other tutorial is purely coincidental!

♥ Lovely Lilac ♥

2011-12-16T11:44:00.000+11:00

♥ Lovely Lilac ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Sensitive kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_220 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDsensitive_element55 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open JDsensitive_paper3, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDsensitive_element9, arrange to the bottom behind frame.

Copy & paste JDsensitive_element1, resize 70%, place to the left.

Copy & paste JDsensitive_element16, arrange as bottom layer.

Copy & paste JDsensitive_element50, resize 55%, arrange to the right.

Copy & paste JDsensitive_element5 & JDsensitive_element6, resize 18%, place near previous layer.

Copy & paste JDsensitive_element47, resize 80%, place over main frame.

Copy & paste JDsensitive_element34, arrange as bottom layer.

Copy & paste JDsensitive_element30, resize 18%, duplicate, place to the left.

Copy & paste JDsensitive_element13, resize 25%, place on the bottom left.

Copy & paste JDinmyforest_element27, resize 50%, place in top right of frame.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Caraterre ROB. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 16th December 2011, any similarity to any other tutorial is purely coincidental!

♥ My Friends In The Forest ♥

2011-12-16T10:48:00.000+11:00

♥ My Friends In The Forest ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome In My Forest kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_209 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDinmyforest_element38 as new layer. Resize 90%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open JDinmyforest_paper10, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDinmyforest_element48, arrange to the bottom.

Copy & paste JDinmyforest_element18, resize 68%, place to the right.

Copy & paste JDinmyforest_element13, resize 80%, place under the frame behind the 'hill'.

Copy & paste JDinmyforest_element2, resize 30%, arrange under the tree.

Copy & paste JDinmyforest_element36, resize 30%, place near previous layer.

Copy & paste JDinmyforest_element47, resize 20%, place in the tree.

Copy & paste JDinmyforest_element22, resize 25%, arrange to the right.

Copy & paste JDinmyforest_element33, resize 40%, place to the right also.

Copy & paste JDinmyforest_element19, place on the bottom.

Copy & paste JDinmyforest_element27, resize 50%, place in top right of frame.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used CAC Pinafore. I also added some words.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 16th December 2011, any similarity to any other tutorial is purely coincidental!

♥ Ho Ho Ho ♥

2011-12-15T11:55:00.000+11:00

♥ Ho Ho Ho ♥

Supplies Needed
PSP X2 (any version will work)
Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.
Awesome Ho Ho Ho kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!
WSL_201 mask by Weescotslass here, thankyou!

Lets get started.
Open a new canvas 650x650.
Copy & paste JDhohoho_element12 as new layer. Resize 80%.
Using your selection tool, select inside of frame, selections, modify, expand 5.
Open JDhohoho_paper2, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.
Select none & bring this paper layer below your frame.
Add your tube/s, doing this now gives you a better idea of placement for your other elements.
Copy & paste JDhohoho_element4, arrange to the right.
Copy & paste JDhohoho_element48, resize 85%, place below main frame.
Copy & paste JDhohoho_element2, resize 40%, place to the right.
Copy & paste JDhohoho_element14, arrange behind your tube, erase any overhang.
Copy & paste JDhohoho_element20 & JDhohoho_element30, resize 30%, arrange to the bottom left under the tree.
Copy & paste JDhohoho_element23, resize 35%, place to top right.
Copy & paste JDhohoho_element39, resize 30%, arrange above previous layer.
Copy & paste JDhohoho_element52 & JDhohoho_element32, resize 25%, place around frame.
Copy & paste JDhohoho_element49, JDhohoho_element51 & JDhohoho_element55 resize 18%, place where ypu prefer, I added a gradient glow to make mine stand out.
Add a new raster layer on the bottom layer, selections, select all,
resize a paper of choice from the kit and paste into selection, select none.
Apply mask, on your layers pallette merge mask group.
Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.
Add dropshadows of choice to each layer if preferred.
Add you name using font of choice, I used Scriptina. I also added a gradient glow.
Add correct © info, crop & resize if needed. Save as a png.
Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 15th December 2011, any similarity to any other tutorial is purely coincidental!

♥ Girl Power ♥

2011-12-01T13:03:00.000+11:00

♥ Girl Power ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome For the Girls kit & For the Girls Wordart by Wilma4Ever, you can purchase both here, thankyou!

WSL_208 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste Wilma4ever_ForTheGirls_EL39 as new layer. Resize 90%. Rotate left 90 degrees.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open Wilma4ever_ForTheGirls_PP02, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste Wilma4ever_ForTheGirls_EL10, arrange under frame & use your pick tool to stretch the layer out so it sits nicely around your main frame.

Copy & paste Wilma4ever_ForTheGirls_Wordart05, resize 27%, arrange behind your tube.

Copy & paste Wilma4ever_ForTheGirls_Wordart04, resize 12%, arrange to the left. I added a gradient glow to help it stand out.

Copy & paste Wilma4ever_ForTheGirls_EL34, place to the top left.

Copy & paste Wilma4ever_ForTheGirls_EL26, resize 60%, place under your tube at the bottom.

Copy & paste Wilma4ever_ForTheGirls_EL30, resize 60%, position on bottom left.

Copy & paste Wilma4ever_ForTheGirls_EL02, resize 28%, place in front of previous layer.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used The Nauti Gal ROB.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 1st December 2011, any similarity to any other tutorial is purely coincidental!

♥ Purplicious Gal ♥

2011-11-30T11:48:00.000+11:00

♥ Purplicious Gal ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Free Like A Bird taggers kit by Stefs Scrapkits, you can download it here, thankyou!

WSL_209 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste Element12_FreelikeaBird_Stef'sScrapkits as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open Paper03_FreelikeaBird_Stef'sScrapkits, resize 65%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

I also duplicated my tube and placed below the frame but above the paper layer and changed the blend mode to luminance.

Copy & paste Element15_FreelikeaBird_Stef'sScrapkits, resize 75%, arrange to the bottom.

Copy & paste Element04_FreelikeaBird_Stef'sScrapkits, resize 60%, arrange above previous layer.

Copy & paste Element05_FreelikeaBird_Stef'sScrapkits, resize 75%, make bottom layer under original frame.

Copy & paste Element06_FreelikeaBird_Stef'sScrapkits, resize 30%, place to the right, duplicate & position.

Copy & paste Element01_FreelikeaBird_Stef'sScrapkits, resize 35%, arrange to the left.

Copy & paste Element17_FreelikeaBird_Stef'sScrapkits, arrange behind your tube.

Copy & paste Element18_FreelikeaBird_Stef'sScrapkits, resize 30%, arrange at bottom right.

Copy & paste Element21_FreelikeaBird_Stef'sScrapkits, resize 25%, place on previous layer.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Curly Coryphaeus. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 30th November 2011, any similarity to any other tutorial is purely coincidental!

♥ Lil' Dreamer ♥

2011-11-30T08:26:00.000+11:00

♥ Lil' Dreamer ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Dreams Of A Boy kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_208 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDdreamsofaboy_element19 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RDdreamsofaboy_paper12, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDdreamsofaboy_element17, arrange to the bottom of frame.

Copy & paste RDdreamsofaboy_element81, resize 75%, arrange below the frame but above paper layer.

Copy & paste RDdreamsofaboy_element6, rersize 85%, arrange to the left.

Copy & paste RDdreamsofaboy_element57, resize 95%, arrange to the bottom behind original frame.

Copy & paste RDdreamsofaboy_element58, place to the bottom left, duplicate, image, flip, mirror.

Copy & paste RDdreamsofaboy_element26, resize 60%, arrange to the right.

Copy & paste RDdreamsofaboy_element48, resize 60%, arrange to the top right, I added a gradient glow to help it stand out.

Copy & paste RDdreamsofaboy_element70, resize 18%, image, mirror & place in tree.

Copy & paste RDdreamsofaboy_element66, resize 30%, position at top left.

Copy & paste RDdreamsofaboy_element63, resize 50%, place behind your tube.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Malihini Tahitian BT. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 30th November 2011, any similarity to any other tutorial is purely coincidental!

♥ O So Sweet ♥

2011-11-29T20:09:00.000+11:00

♥ O So Sweet ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.

Awesome O So Sweet kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_201 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDososweet_element40 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDososweet_paper5, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDososweet_element42, arrange to the top right of frame.

Copy & paste RDososweet_element24, resize 30%, arrange to the top left.

Copy & paste RDososweet_element62, rersize 90%, arrange to the bottom under your tube.

Copy & paste RDososweet_element6, resize 25%, arrange to the left, duplicate & position on the right.

Copy & paste RDososweet_element51, resize 80%, place to the left,duplicate & place to the right.

Copy & paste RDososweet_element14, resize 60%, arrange to the right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Send Flowers. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 29th November 2011, any similarity to any other tutorial is purely coincidental!

♥ Remember Me ♥

2011-11-29T18:48:00.000+11:00

♥ Remember Me ♥

Supplies Needed
PSP X2 (any version will work)
Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.
Awesome Remember Remember kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!
WSL_19 mask by Weescotslass here, thankyou!

Lets get started.
Open a new canvas 650x650.
Copy & paste RDrememberremember_element42 as new layer. Resize 70%.
Using your selection tool, select inside of frame, selections, modify, expand 8.
Open RDrememberremember_paper6, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.
Select none & bring this paper layer below your frame.
Add your tube/s, doing this now gives you a better idea of placement for your other elements.
Copy & paste RDrememberremember_element61, arrange over 1st frame.
Copy & paste RDrememberremember_element77, resize 70%, arrange to the top right.
Copy & paste RDrememberremember_element15, resize 50%, arrange to the right.
Copy & paste RDrememberremember_element33, resize 90%, arrange as bottom layer.
Copy & paste RDrememberremember_element14, resize 25%, place to the left, duplicate.
Add a new raster layer on the bottom layer, selections, select all,
resize a paper of choice from the kit and paste into selection, select none.
Apply mask, on your layers pallette merge mask group.
Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.
Add dropshadows of choice to each layer if preferred.
Add you name using font of choice, I used CAC Shishoni Brush. I also added some words & a gradient glow.
Add correct © info, crop & resize if needed. Save as a png.
Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 29th November 2011, any similarity to any other tutorial is purely coincidental!

♥ Autumn Memories ♥

2011-11-29T15:22:00.000+11:00

♥ Autumn Memories ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Colors Of Autumn kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_19 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDcolorsofautumn_element80 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDcolorsofautumn_paper6, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDcolorsofautumn_element2, resize 80%, arrange to the bottom of frame.

Copy & paste RDcolorsofautumn_element14, resize 60%, arrange to the top right.

Copy & paste RDcolorsofautumn_element44, rersize 80%, arrange to the left as bottom layer, duplicate, image, flip, image, mirror & psotion on the right.

Copy & paste RDcolorsofautumn_element62, resize 48%, arrange to the left.

Copy & paste RDcolorsofautumn_element29, resize 80%, place to the left.

Copy & paste RDcolorsofautumn_element84, resize 30%, arrange to the left.

Copy & paste RDcolorsofautumn_element60, resize 30%, arrange to the right.

Copy & paste RDcolorsofautumn_element46, arrange near the top, I also added a gradient glow to help it stand out, repeat this step for RDcolorsofautumn_element57.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used CAC Pinafore. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 29th November 2011, any similarity to any other tutorial is purely coincidental!

♥ Christmas Is Coming ♥

2011-11-19T12:14:00.000+11:00

♥ Christmas Is Coming ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.

Awesome Traditional Christmas kit by Wilma4Ever, you can purchase it here, thankyou!

WSL_167 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste Wilma4ever_TC_EL49 as new layer. Resize 65%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open Wilma4ever_TC_PP10, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste Wilma4ever_TC_EL31, resize 60%, arrange to the top right.

Copy & paste Wilma4ever_TC_EL46, arrange to the right.

Copy & paste Wilma4ever_TC_EL42, resize 70%, arrange to the left.

Copy & paste Wilma4ever_TC_EL41, resize 70%, place to the left.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used DJ Fiddlesticks. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 19th November 2011, any similarity to any other tutorial is purely coincidental!

♥ Garden Of Time ♥

2011-11-18T17:03:00.000+11:00

♥ Garden Of Time ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Escape kit by Sweet Cravings Scraps, you can purchase it here, thankyou!

WSL_117 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SCS_Escape_Frame3 as new layer. Resize 65%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open SCS_Escape_Paper1, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SCS_Escape_BirdHouse, resize 60%. image, mirror & place to the bottomleft.

Copy & paste SCS_Escape_BirdInNest, resize 50%, arrange to the right.

Copy & paste SCS_Escape_Bow5, resize 45%, image, arrange to the top right.

Copy & paste SCS_Escape_FloralSwing, resize 70%, image, mirror & place to the right. Erase any excess.

Copy & paste SCS_Escape_Tree, resize 60%, place to the left.

Copy & paste SCS_Escape_Flower6, resize 45%, arrange to the bottom left. Duplicate, image, mirror.

Copy & paste SCS_Escape_Clock, resize 30%, place to the right.

Copy & paste SCS_Escape_Butterfly2, resize 15%, place to the right.

Copy & paste SCS_Escape_Butterfly1, resize 20%, arrange to the left.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Miss Le Gatees. I also added some words and gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 18th November 2011, any similarity to any other tutorial is purely coincidental!

♥ I Count My Blessings ♥

2011-10-29T08:39:00.000+11:00

♥ I Count My Blessings ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Every Morning kit by Sweet Cravings Scraps, you can purchase it here, thankyou!

WSL_163 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SCS_EveryMorning_Frame9 as new layer. Resize 55%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open SCS_EveryMorning_Paper5, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SCS_EveryMorning_Frame6, resize 60%. Place above the frame.

Copy & paste SCS_EveryMorning_Tree, resize 60%, arrange to the left.

Copy & paste SCS_EveryMorning_Clouds, resize 50%, image, mirror & arrange above the paper but below the frame.

Copy & paste SCS_EveryMorning_Bags, resize 35%, place to the bottom left.

Copy & paste SCS_EveryMorning_LeafStem, resize 50%, place to the right.

Copy & paste SCS_EveryMorning_Acorns, resize 30%, arrange to the bottom right.

Copy & paste SCS_EveryMorning_Broom, resize 60%, place to the right.

Copy & paste SCS_EveryMorning_Bow2, resize 40%, image, mirror & place to top right.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Miss Le Gatees. I also added some words and gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 29th October 2011, any similarity to any other tutorial is purely coincidental!

♥ What's Up Pussy Cat? ♥

2011-10-28T12:35:00.000+11:00

♥ What's Up Pussy Cat? ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, I purchased my tube through AMI,

these tubes are no longer available there but you can buy them here if you would like to use her work.

Awesome What's Up Pussy Cat? kit by Sweet Cravings Scraps, you can purchase it here, thankyou!

WSL_133 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SCS_WUPC_Frame2 as new layer. Resize 60%. Rotate left 90 degrees.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open SCS_WUPC_Paper3, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SCS_WUPC_Field, resize 50%. Place above the paper layer but below the frame.

Copy & paste SCS_WUPC_GardenPath, resize 50%, arrange to the bottom of frame.

Copy & paste SCS_WUPC_LeafBranch1, resize 85%, arrange to the left.

Copy & paste SCS_WUPC_LeafBranch2, resize 75%, arrange to the right.

Copy & paste SCS_WUPC_CuteKittyCat1, resize 30%, place to the left.

Copy & paste SCS_WUPC_StringNet1, arrange as bottom layer.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used 2 Peas Mister Giggles. I also added some words and gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 28th October 2011, any similarity to any other tutorial is purely coincidental!

♥ Bless My Broken Heart ♥

2011-10-23T10:33:00.000+11:00

♥ Bless My Broken Heart ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Lughnassad kit by Wilma4Ever, you can purchase it here, thankyou!

WSL_141 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste Wilma4ever-Lughnassad-EL27 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open Wilma4ever-Lughnassad-PP10, resize 70%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste Wilma4ever-Lughnassad-EL15, arrange to the bottom under your tube.

Copy & paste Wilma4ever-Lughnassad-EL23, arrange to the left, duplicate, image, mirror.

Copy & paste Wilma4ever-Lughnassad-EL26, resize 80%, arrange to the left, duplicate, image, mirror.

Copy & paste Wilma4ever-Lughnassad-EL20, resize 60%, place behind tube.

Copy & paste Wilma4ever-Lughnassad-EL06, resize 80%, arrange above frame.

Copy & paste Wilma4ever-Lughnassad-EL30, resize 50%, place to top left, duplicate, image, mirror.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used FB Lipgloss. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 23rd October 2011, any similarity to any other tutorial is purely coincidental!

♥ Sweet As Candy ♥

2011-10-23T09:34:00.000+11:00

♥ Sweet As Candy ♥

Supplies Needed
PSP X2 (any version will work)
Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.
Awesome Sweet As Candy taggers kit by Stefs Scrapkits, you can purchase it here, thankyou!
WSL_220 mask by Weescotslass here, thankyou!

Lets get started.
Open a new canvas 650x650.
Copy & paste ele49_SweetasCandy_Stef'sScrapkits as new layer. Resize 63%.
Using your selection tool, select inside of frame, selections, modify, expand 10.
Open pap01_SweetasCandy_Stef'sScrapkits, resize 65%, copy & paste as new layer, selections, invert & hit delete on your keyboard.
Select none & bring this paper layer below your frame.
Add your tube/s, doing this now gives you a better idea of placement for your other elements.
I also duplicated my tube and placed below the frame but above the paper layer and changed the blend mode to luminance.
Copy & paste ele20_SweetasCandy_Stef'sScrapkits, resize 45%, arrange to the left.
Copy & paste ele52_SweetasCandy_Stef'sScrapkits, arrange behind your tube.
Copy & paste ele55_SweetasCandy_Stef'sScrapkits, resize 80%, arrange to the left above frame, duplicate, image, mirror & erase any overhang.
Copy & paste ele21_SweetasCandy_Stef'sScrapkits, resize 35%, place to the right.
Copy & paste ele59_SweetasCandy_Stef'sScrapkits, resize 70%, arrange as bottom layer to the left, duplicate, image, mirror, flip.
Copy & paste ele40_SweetasCandy_Stef'sScrapkits , resize 35%, place in top right corner of frame.
Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.
Apply mask, on your layers pallette merge mask group.
Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.
Add dropshadows of choice to each layer if preferred.
Add you name using font of choice, I used CAC Pinafore. I also added some words & a gradient glow.
Add correct © info, crop & resize if needed. Save as a png.
Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 23rd October 2011, any similarity to any other tutorial is purely coincidental!

♥ Boo ♥

2011-10-22T12:15:00.001+11:00

♥ Boo ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Spookalicious Collab kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_180 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDspookalicious_element21 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 5.

Open JDspookalicious_paper10, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDspookalicious_element24, arrange below frame but above paper layer, erase any overhang, duplicate & move further down your frame.

Copy & paste JDspookalicious_element30, resize 30%, place to the top left.

Copy & paste JDspookalicious_element8, resize 30%, place to the left.

Copy & paste JDspookalicious_element33, resize 30%, place to the right.

Copy & paste JDspookalicious_element42, resize 30%, arrange to the top right.

Copy & paste JDspookalicious_element41, arrange as bottom layer to the right, duplicate, image, mirror, flip.

Copy & paste JDspookalicious_element14, resize 50%, arrange to the bottom.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Whoa DNA. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 22nd October 2011, any similarity to any other tutorial is purely coincidental!

♥ Spookalicious ♥

2011-10-19T12:42:00.000+11:00

♥ Spookalicious ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, I purchased my tube through AMI, these tubes are no longer available there but you can buy them here if you would like to use her work.

Awesome Spookalicious Collab kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_167 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDspookalicious_element23 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RDspookalicious_paper2, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDspookalicious_element14, resize 58%, arrange to the right.

Copy & paste RDspookalicious_element2, resize 38%, arrange to the lower right.

Copy & paste RDspookalicious_element29, rersize 80%, arrange to the bottom.

Copy & paste RDspookalicious_element31, resize 35%, image, mirror, arrange to top right.

Copy & paste RDspookalicious_element24, arrange below frame but above paper layer, erase any overhang.

Copy & paste RDspookalicious_element16, resize 35%, place at top left of frame.

Copy & paste RDspookalicious_element39, resize 50%, arrange to the right.

Copy & paste RDspookalicious_element37, resize 30%, arrange as bottom left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Blackjack Regular. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 19th October 2011, any similarity to any other tutorial is purely coincidental!

♥ She's A Classy Girl ♥

2011-10-14T11:38:00.000+11:00

♥ She's A Classy Girl ♥

Supplies Needed
PSP X2 (any version will work)
Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.
Awesome Classy Girl kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!
WSL_209 mask by Weescotslass here, thankyou!

Lets get started.
Open a new canvas 650x650.
Copy & paste RDclassygirl_element55 as new layer. Resize 80%.
Using your selection tool, select inside of frame, selections, modify, expand 8.
Open RDclassygirl_paper9, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.
Select none & bring this paper layer below your frame.
Add your tube/s, doing this now gives you a better idea of placement for your other elements.
Copy & paste RDclassygirl_element26, resize 90%, arrange to the right as bottom layer, duplicate, image, mirror.
Copy & paste RDclassygirl_element27, resize 83%, arrange to the right over main frame.
Copy & paste RDclassygirl_element17, rersize 80%, arrange to the left.
Copy & paste RDclassygirl_element99, resize 40%, image, mirror, arrange to top right.
Copy & paste RDclassygirl_element73, resize 30%, place to the right & duplicate.
Copy & paste RDclassygirl_element2, resize 30%, duplicate, arrange above the 2 previous flowers.
Copy & paste RDclassygirl_element35, resize 18%, arrange to the left.
Copy & paste RDhelloautumn_element23, resize 90%, arrange as bottom layer.
Add a new raster layer on the bottom layer, selections, select all,
resize a paper of choice from the kit and paste into selection, select none.
Apply mask, on your layers pallette merge mask group.
Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.
Add dropshadows of choice to each layer if preferred.
Add you name using font of choice, I used CAC Shishoni Brush. I also added some words & a gradient glow.
Add correct © info, crop & resize if needed. Save as a png.
Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 14th October 2011, any similarity to any other tutorial is purely coincidental!

♥ Sweet Girl ♥

2011-10-14T10:32:00.000+11:00

♥ Sweet Girl ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Sweet Candy Girl kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_219 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDsweetcandygirl_element13 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open JDsweetcandygirl_paper9, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDsweetcandygirl_element14, resize 86%, arrange over the top of your original frame.

Copy & paste JDsweetcandygirl_element34, arrange as bottom layer to the top left, duplicate, image, mirror, flip & move to the bottom right.

Copy & paste JDsweetcandygirl_element28, resize 70%, place under frame but above your paper layer, erase any overhang.

Copy & paste JDsweetcandygirl_element58, resize 80%, arrange to the right, duplicate, image, mirror.

Copy & paste JDsweetcandygirl_element42, resize 45%, arrange to the bottom left. I added a gradient glow to mine.

Copy & paste JDsweetcandygirl_element41, resize 30%, place below previous layer.

Copy & paste JDsweetcandygirl_element11, resize 50%, arrange to the right.

Copy & paste JDsweetcandygirl_element21, resize 30%, place to the left.

Copy & paste JDsweetcandygirl_element23, resize 30%, place to left, duplicate & arrange to the right.

Copy & paste JDsweetcandygirl_element12, resize 30%, arrange to bottom right.

Copy & paste JDsweetcandygirl_element62 & JDsweetcandygirl_element61, resize 25% & 30%, place to bottom right as well.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used CAC Shishoni Brush. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 14th October 2011, any similarity to any other tutorial is purely coincidental!

♥ I ♥ Skullz ♥

2011-10-12T13:35:00.000+11:00

♥ I ♥ Skullz ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Skullz Gurlz kit by Rieka_Rafita, you can purchase here, thankyou!

WSL_219 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frame3 as new layer. Resize 80%.

Using your selection tool, select inside of 1st frame, selections, modify, expand 10.

Open RR_Paper1, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_WordartCircle, resize 90%, arrange around main frame.

Copy & paste RR_Cap1, resize 30%, place to top right.

Copy & paste RR_StarBead, resize 60%, arrange to the left.

Copy & paste RR_Glittertrail, arrange to the bottom.

Copy & paste RR_DoodleFlower, resize 50%, place to the top right, duplicatea few times & place where you think looks best.

Copy & paste RR_GlitterSplat, resize 30%, duplicate a couple of times & place where you prefer.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Krazy Nights.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 12th October 2011, any similarity to any other tutorial is purely coincidental!

♥ Spooky ♥

2011-10-06T16:52:00.000+11:00

♥ Spooky ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Hocus Pocus kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_223 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDhocuspocus_element25 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open JDhocuspocus_paper7, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDhocuspocus_element9, resize 75%, arrange in the centre of your frame.

Copy & paste JDhocuspocus_element32, resize 50%, arrange above your previous layer.

Copy & paste JDhocuspocus_element43, resize 83%, place to the centre of frame.

Copy & paste JDhocuspocus_element3, resize 38%, arrange as bottom right.

Copy & paste JDhocuspocus_element28, resize 30%, arrange to the top right.

Copy & paste JDhocuspocus_element1, resize 25%, place in front of 'pot'.

Copy & paste JDhocuspocus_element34, resize 30%, arrange where you think looks best.

Copy & paste JDhocuspocus_element39, resize 22%, place at top left of frame.

Copy & paste JDhocuspocus_element12, resize 25%, place to right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Slap Happy. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 6th October 2011, any similarity to any other tutorial is purely coincidental!

♥ Paradise Beach ♥

2011-10-02T16:45:00.000+11:00

♥ Paradise Beach ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Wilma's Beach Paradise 03 kit by Wilma4Ever, you can purchase it here, thankyou!

WSL_209 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste Wilma4ever_Beach03_EL82 as new layer. Resize 60%.

Using your selection tool, select inside of frame, selections, modify, expand 6.

Open Wilma4ever_Beach03_PP01, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste Wilma4ever_Beach03_EL37, resize 80%, arrange to the top left corner, duplicate, imafe, mirror, flip.

Copy & paste Wilma4ever_Beach03_EL67, resize 80%, arrange to the bottom of frame.

Copy & paste Wilma4ever_Beach03_EL51, resize 55%, arrange to the middle of frame.

Copy & paste Wilma4ever_Beach03_EL68, resize 45%, place behind previous layer.

Copy & paste Wilma4ever_Beach03_EL14, resize 60%, arrange to the right.

Copy & paste Wilma4ever_Beach03_EL01, resize 30%, arrange to the lower left.

Copy & paste Wilma4ever_Beach03_EL06, resize 60%, place to the right.

Copy & paste Wilma4ever_Beach03_EL04, resize 50%, arrange in bottom left corner.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Kon Tiki Enchanted. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 2nd October 2011, any similarity to any other tutorial is purely coincidental!

♥ Halloween Sale ♥

2011-10-01T10:19:00.000+10:00

нαℓℓσωєєи ѕαℓє αт яιєкα_яαfιтα, ¢нє¢к συт αℓℓ тнє ѕανιиgѕ нєяє ♥

♥ Spring Hope ♥

2011-09-03T08:34:00.000+10:00

♥ Spring Hope ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Spring Hope taggers kit by Scraps Dimensions, you can download it here at her blog, thankyou!

WSL_219 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SH FRAME 1 as new layer. Resize 58%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open SH PAPER 8, resize 55%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SH WA 1, resize 73%, arrange to the centre. I also added a gradient glow to make it stand out.

Copy & paste SH BUTTERFLY 1, resize 18%, place to the left.

Copy & paste SH DAISY 3, resize 25%, arrange to the bottom left, duplicate, image, mirror.

Copy & paste SH DAISY 2, resize 48%, place inbetween the previous layers.

Copy & paste SH BUTTERFLY 3, resize 20%, image, mirror, arrange to the right.

Copy & paste SH FLOWERS, resize 72%, arrange to the left, duplicate, image, mirror.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Turbayne Running Hand. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 3rd September 2011, any similarity to any other tutorial is purely coincidental!

♥ Cutie Patootie ♥

2011-09-02T16:38:00.000+10:00

♥ Cutie Patootie ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of CEI, I purchased my tube through MPT, they are no longer available there & I would love

to know where they have moved to, any info would be greatly appreciated!

Awesome Cutie Patootie taggers kit by Scraps Dimensions, you can download it here at her blog, thankyou!

WSL_220 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SD CP FRAME 2 as new layer. Resize 60%. Image, roatate, right, 90.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open SD CP PAPER 14, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SD CP WA, resize 50%, arrange to the centre. I also added a gradient glow to make it stand out.

Copy & paste SD CP BOW 3, resize 50%, place at top of frame.

Copy & paste SD CP BACKGROUND GLITTER, resize 80%, rotate, right 90, arrange as bottom layer.

Copy & paste SD CP BUTTON, resize 15%, place in top right corener of frame.

Copy & paste SD CP FLOWER 1 & SD CP FLOWER 3, resize 20%, arrange to the right.

Copy & paste SD CP BUTTERFLY 1, resize 15%, arrange near your flowers.

Copy & paste SD CP BIRD 2, resize 13%, place near the bottom of frame.

Copy & paste SD CP WIRE FENCE, resize 60%, make bottom layer.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Aka Frivolity. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 2nd September 2011, any similarity to any other tutorial is purely coincidental!

♥ Welcome To My Garden ♥

2011-09-01T20:05:00.000+10:00

♥ Welcome To My Garden ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Subtle Autumn taggers kit by Wilma4Ever, you can purchase it here, thankyou!

WSL_223 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste Wilma4ever_SubtleAutumn_EL18 as new layer. Resize 70%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open Wilma4ever_SubtleAutumn_PP02, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste Wilma4ever_SubtleAutumn_EL50, resize 60%, arrange along the top of frame, duplicate & place to the bottom.

Copy & paste Wilma4ever_SubtleAutumn_EL05, resize 74%, make bottom layer so it is visible under the frame. Duplicate, image, mirror, flip

Copy & paste Wilma4ever_SubtleAutumn_EL04, resize 65%, arrange to the left.

Copy & paste Wilma4ever_SubtleAutumn_EL49, resize 70%, place to the bottom.

Copy & paste Wilma4ever_SubtleAutumn_EL38, resize 55%, arrange to the right.

Copy & paste Wilma4ever_SubtleAutumn_EL02, resize 30%, arrange to the left.

Copy & paste Wilma4ever_SubtleAutumn_EL37, resize 20%, place near previous layer.

Copy & paste Wilma4ever_SubtleAutumn_EL36, resize 25%, arrange in bottm left corner.

Copy & paste Wilma4ever_SubtleAutumn_EL35, resize 20%, place in bottom right corner.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Miss Stanfort. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 1st September 2011, any similarity to any other tutorial is purely coincidental!

♥ Hello Autumn ♥

2011-09-01T17:49:00.000+10:00

♥ Hello Autumn ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Hello Autumn kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_178 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDhelloautumn_element49 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDhelloautumn_paper9, resize 55%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDhelloautumn_element3, resize 80%, arrange to the top.

Copy & paste RDhelloautumn_element25, resize 70%, arrange to the right.

Copy & paste RDhelloautumn_element1, arrange under your tube on the bottom.

Copy & paste RDhelloautumn_element68, resize 30%, arrange to top left.

Copy & paste RDhelloautumn_element19, resize 25%, place to the left.

Copy & paste RDhelloautumn_element48, resize 35%, arrange to bottom right.

Copy & paste RDhelloautumn_element33, resize 60%, arrange to the right.

Copy & paste RDhelloautumn_element23, resize 90%, arrange as bottom layer.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Miss Lankfort. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 1st September 2011, any similarity to any other tutorial is purely coincidental!

♥ Love Is A Rose ♥

2011-08-30T21:14:00.000+10:00

♥ Love Is A Rose ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Burlesque taggers kit by Wilma4Ever, you can purchade it here, thankyou!

WSL_192 mask by Weescotslass here, thankyou!

Love Is A Rose wordart by Angel, you can download here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste Wilma4ever_Burlesque_EL11 as new layer. Resize 90%.

Using your selection tool, select inside of frame, selections, modify, expand 4.

Open Wilma4ever_Burlesque_PP08, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste Wilma4ever_Burlesque_EL28, resize 80%, arrange to the top of frame.

Copy & paste Wilma4ever_Burlesque_EL09, image, flip, place above paper but below frame.

Copy & paste Wilma4ever_Burlesque_EL21, resize 75%, arrange to the left.

Copy & paste Wilma4ever_Burlesque_EL24, resize 45%, place in the centre of frame.

Copy & paste Wilma4ever_Burlesque_EL30, resize 75%, arrange behind your tube to the right.

Copy & paste Wilma4ever_Burlesque_EL25, resize 80%, arrange to the bottom.

Copy & paste Wilma4ever_Burlesque_EL17, resize 35%, place in the centre of frame behind your tube.

Copy & paste Love Is A Rose wordart, place where you think looks best.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used CAC Shishoni Brush. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 30th August 2011, any similarity to any other tutorial is purely coincidental!

♥ Pink Dreams ♥

2011-08-30T15:42:00.000+10:00

♥ Pink Dreams ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, I purchased my tube through AMI,

these tubes are no longer available there but you can buy them here if you would like to use her work.

Awesome Pink Dreams kit by Rieka_Rafita, you can purchase here, thankyou!

WSL_105 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frame2 as new layer. Rotate 90 degrees right. Resize 80%.

Copy & paste RR_Frame3 & arrange above the previous layer.

Using your selection tool, select inside of 1st frame, selections, modify, expand 10.

Open RR_Paper6, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_BirdHouse, resize 55%, arrange to bottom left.

Copy & paste RR_Bird, resize 25%, place near bird house.

Copy & paste RR_FlowerScatters, arrange as bottom layer.

Copy & paste RR_Wordart2, resize 75%, arrange to the bottom of frame.

Copy & paste RR_FlowerLeaves, resize 35%, place to the top right, duplicate, image, mirror.

Copy & paste RR_Button1, resize 40%, duplicate & place above your 2 orevious layers.

Copy & paste RR_StitchedSequin, duplicate 4 times, & arrange around the bottom frame.

Copy & paste RR_Doodle, arrange as bottom layer behind your frames, duplicate, image, mirror, image, flip.

Copy & paste RR_Leaves, arrange to the bottom behind your wordart, duplicate, image, flip.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Sweetheart Script.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 30th August 2011, any similarity to any other tutorial is purely coincidental!

♥ It's Your Love ♥

2011-08-27T17:32:00.000+10:00

♥ It's Your Love ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.

Awesome Jackson kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_170 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDjackson_element21 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open JDjackson_paper4, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDjackson_element1, resize 75%, arrange behind your tube to the top right. Duplicate, image, mirror.

Copy & paste JDjackson_element45, resize 50%, arrange to the right. Duplicate, image, mirror.

Copy & paste JDjackson_element29, resize 25%, place to the right.

Copy & paste JDjackson_element25, resize 80%, arrange as bottom layer.

Copy & paste JDjackson_element11, resize 25%, arrange to lower left, duplicate, image, mirror & arrange to the right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Swenson. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 27th August 2011, any similarity to any other tutorial is purely coincidental!

♥ Goodbye Summer ♥

2011-08-27T16:12:00.000+10:00

♥ Goodbye Summer ♥

Supplies Needed
PSP X2 (any version will work)
Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.
Awesome Goodbye Summer kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!
WSL_219 mask by Weescotslass here, thankyou!

Lets get started.
Open a new canvas 650x650.
Copy & paste RDgoodbyesummer_element12 as new layer. Resize 78%.
Using your selection tool, select inside of frame, selections, modify, expand 8.
Open RDgoodbyesummer_paper9, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.
Select none & bring this paper layer below your frame.
Copy & paste RDgoodbyesummer_element60, resize 83% and arrange above the first frame.
Add your tube/s, doing this now gives you a better idea of placement for your other elements.
Copy & paste RDgoodbyesummer_element28, arrange as bottom layer.
Copy & paste RDgoodbyesummer_element37, arrange to the left. Duplicate, image, mirror.
Copy & paste RDgoodbyesummer_element23, resize 60%, place to the right.
Copy & paste RDgoodbyesummer_element39, resize 50%, arrange above previous layer.
Copy & paste RDgoodbyesummer_element42, resize 25%, place to the right.
Copy & paste RDgoodbyesummer_element14, resize 90%, arrange as bottom layer.
Copy & paste RDgoodbyesummer_element2, resize 25%, arrange to the left.
Copy & paste RDgoodbyesummer_element59, resize 40%, place to lower right.
Copy & paste RDgoodbyesummer_element46, resize 30%, place to lower left.
Add a new raster layer on the bottom layer, selections, select all,
resize a paper of choice from the kit and paste into selection, select none.
Apply mask, on your layers pallette merge mask group.
Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.
Add dropshadows of choice to each layer if preferred.
Add you name using font of choice, I used Anglia Script. I also added some words & a gradient glow.
Add correct © info, crop & resize if needed. Save as a png.
Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 27th August 2011, any similarity to any other tutorial is purely coincidental!

♥ Magic Under The Sea ♥

2011-08-26T10:11:00.000+10:00

♥ Magic Under The Sea ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Magic Underwater kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_220 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDmagicunderwater_element15 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDmagicunderwater_paper15, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDmagicunderwater_element5, resize 20%, arrange inside your frame.

Copy & paste RDmagicunderwater_element13, resize 20%, arrange near previous layer.

Copy & paste RDmagicunderwater_element10, resize 35%, place behind tube.

Copy & paste RDmagicunderwater_element24, resize 80%, arrange behind tube to the bottom of frame.

Copy & paste RDmagicunderwater_element78, resize 60%, place to the left. Duplicate, image, mirror.

Copy & paste RDmagicunderwater_element93, arrange as bottom layer.

Copy & paste RDmagicunderwater_element11, resize 40%, arrange to the right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Shalimar ROB. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 26th August 2011, any similarity to any other tutorial is purely coincidental!

♥ Who's That Girl ♥

2011-08-20T18:16:00.000+10:00

♥ Who's That Girl ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.

Awesome Who's That Girl kit by Sweet Cravings Scraps, you can purchase it here, thankyou!

WSL_208 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SCS_Who'sThatGirl_Frame2 as new layer. Resize 65%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open SCS_Who'sThatGirl_Paper14, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SCS_Who'sThatGirl_Flower6, resize 50%. Place to the bottom right of frame.

Copy & paste SCS_Who'sThatGirl_Bow1, resize 50%, arrange to the left.

Copy & paste SCS_Who'sThatGirl_Basket, resize 40%, arrange to the bottom left.

Copy & paste SCS_Who'sThatGirl_Flower2, resize 4%, arrange to the bottom. Duplicate & arrange to the right.

Copy & paste SCS_Who'sThatGirl_Chair, resize 48%, place to the left.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used 2 Peas A Little Loopy. I also added some words and gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 20th August 2011, any similarity to any other tutorial is purely coincidental!

♥ Love Is In The Air ♥

2011-08-12T14:02:00.000+10:00

♥ Love Is In The Air ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.

Awesome Love Is In The Air taggers kit by Stefs Scrapkits, you can purchase it here, thankyou!

WSL_208 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste ele61_LoveisintheAir_Stef'sScrapkits as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open pap08_LoveisintheAir_Stef'sScrapkits, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

I also duplicated my tube and placed below the frame but above the paper layer and changed the blend mode to luminance.

Copy & paste ele64_LoveisintheAir_Stef'sScrapkits, resize 80%, arrange to the left.

Copy & paste ele58_LoveisintheAir_Stef'sScrapkits, resize 60%, place to the right.

Copy & paste ele50_LoveisintheAir_Stef'sScrapkits, resize 75%, arrange as bottom layer to the bottom of frame.

Copy & paste ele07_LoveisintheAir_Stef'sScrapkits, resize 35%, place to the right.

Copy & paste ele37_LoveisintheAir_Stef'sScrapkits, resize 40%, image, mirror, arrange to the lower right.

Copy & paste ele28_LoveisintheAir_Stef'sScrapkits, resize 60%, arrange to the bottom so it looks as though your tube is standing on top.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Dominique. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 12th August 2011, any similarity to any other tutorial is purely coincidental!

♥ Sweet Summer Nights ♥

2011-08-10T14:44:00.000+10:00

♥ Sweet Summer Nights ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Keith Garvey, available here at PSP Tubes Emporium.

Awesome Sweet Summer Nights kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_216 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDsweetsummernights_element15 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDsweetsummernights_paper3, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDsweetsummernights_element72, resize 80%, arrange over your frame.

Copy & paste RDsweetsummernights_element10, resize 60%, arrange to the top left as bottom layer, duplicate, image, flip, merge down, duplicate, mirror.

Copy & paste RDsweetsummernights_element23, resize 75%, place behind tube.

Copy & paste RDsweetsummernights_element37, resize 78%, arrange to the left. Duplicate, image, mirror.

Copy & paste RDsweetsummernights_element73, resize 95%, place to the left.

Copy & paste RDsweetsummernights_element66, resize 30%, arrange to the left.

Copy & paste RDsweetsummernights_element4, resize 30%, arrange to the right.

Copy & paste RDsweetsummernights_element50, resize 20%, arrange to the bottom left.

Copy & paste RDsweetsummernights_element42, resize 95%, arrange as bottom layer.

Copy & paste RDsweetsummernights_element75, resize 25%, place to bottom right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Lavishly Yours ROB. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 10th August 2011, any similarity to any other tutorial is purely coincidental!

♥ Sunny Days ♥

2011-08-10T14:06:00.000+10:00

♥ Sunny Days ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Joel Adams, I purchased my tubes through CILM,

these tubes are no longer available there but are available at the CDO Store,

if you would like to use this work, please visit here.

Awesome Sunny Days kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_220 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDsunnydays_element10 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDsunnydays_paper7, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDsunnydays_element46, resize 85%, arrange to the right as bottom layer, duplicate, image, flip, merge down, duplicate, mirror.

Copy & paste RDsunnydays_element45, resize 45%, place to the right.

Copy & paste RDsunnydays_element64, resize 80%, arrange to the left.

Copy & paste RDsunnydays_element28, resize 65%, image, mirror, arrange infront of previous layer to the left. Duplicate, image, mirror.

Copy & paste RDsunnydays_element29, resize 60%, arrange to the left.

Copy & paste RDsunnydays_element47, resize 65%, arrange to the left behind your tube.

Copy & paste RDsunnydays_element43, resize 50%, arrange to the bottom right.

Copy & paste RDsunnydays_element30, arrange as bottom layer.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Amelie. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 10th August 2011, any similarity to any other tutorial is purely coincidental!

♥ You Are My Poison ♥

2011-08-10T13:11:00.000+10:00

♥ You Are My Poison ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Lady Mishka, I purchased my tube through PTE,

these tubes are no longer available there but are available here at SATC.

Awesome Poison kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_106 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDpoison_element52 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open JDpoison_paper1, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDpoison_element37, resize 75%, arrange to the left of frame.

Copy & paste JDpoison_element50, resize 40%, arrange to the right.

Copy & paste JDpoison_element41, resize 60%, place behind previous layer.

Copy & paste JDpoison_element28, resize 80%, place behind tube.

Copy & paste JDpoison_element24, resize 30%, image, mirror & arrange to the right.

Copy & paste JDpoison_element23, resize 45%, arrange to the left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Ambiance Swash. I also added some words.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 10th August 2011, any similarity to any other tutorial is purely coincidental!

♥ Yummy & Sweet ♥

2011-08-09T18:14:00.000+10:00

♥ Yummy & Sweet ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Cupcake-Licious kit by Rieka_Rafita, you can purchase here, thankyou!

WSL_105 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frame3 as new layer. Resize 75%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RR_Paper7, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_Scatter, arrange as bottom layer. Duplicate, image, mirror.

Copy & paste RR_Wordart2, resize 60%, place to the bottom left of frame.

Copy & paste RR_Wordart3, resize 60%, arrange near previous layer.

I added a white gradient glow to both wordarts.

Copy & paste RR_BeadString, resize 60%, arrange to the right of frame.

Copy & paste RR_Bow2, resize 70%, image, mirror & place above previous layer.

Copy & paste RR_Flower5, resize 60%, arrange to the left.

Copy & paste RR_Cupcake5, resize 45%, place to the bottom right.

Copy & paste RR_Sparkle, arrange behind your tube.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Sweetheart Script.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 9th August 2011, any similarity to any other tutorial is purely coincidental!

♥ It's All About The Stripes ♥

2011-08-07T08:52:00.000+10:00

♥ It's All About The Stripes ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Emo kit by Candy's Treats, you can purchase here at Twilight Scraps, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste CandysTreats-Gorjuss-frame7 as new layer.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open CandysTreats-paper13, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste CandysTreats-bg4,resize 90%, arrange as bottom layer.

Copy & paste CandysTreats-String, arrange to the bottom of frame.

Copy & paste CandysTreats-tree, resize 75%, arrange to the right.

Copy & paste CandysTreats-Flower2, resize 35%, arrange to the right.

Copy & paste CandysTreats-Ele6a, resize 70% and place in top left corner of frame.

Copy & paste CandysTreats-bg2, resize 90%, make bottom layer & arrange to the top right corner of frame, duplicate, image, flip & mirror.

Copy & paste CandysTreats-WA-cute,

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Do I Like Stripes. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 7th August 2011, any similarity to any other tutorial is purely coincidental!

♥ Think Pink ♥

2011-07-28T10:37:00.000+10:00

♥ Think Pink ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Think Pink kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_122 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDthinkpink_element73 as new layer. Resize 90%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDthinkpink_paper10, resize 80%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste a close-up/tubes of your choice, arrange below frame but above the paper, I changed the blend mode to luminance.

Copy & paste RDthinkpink_element3, resize 80%, arrange to the right.

Copy & paste RDthinkpink_element31, resize 80%, place to the left, duplicate, image, mirror.

Copy & paste RDthinkpink_element4, resize 20%, arrange top left, duplicate, image, mirror & place to the right.

Copy & paste RDthinkpink_element9, arrange to the bottom of frame as bottom layer.

Copy & paste RDthinkpink_element41, arrange to the right as bottom layer, duplicate, image, mirror, flip & arrange to the left side.

Copy & paste RDthinkpink_element71, resize 35%, arrange to the lower left so it covers the stem of the previous flower layer.

Copy & paste RDthinkpink_element62, resize 45%, image, mirror & arrange to the bottom right.

Copy & paste RDthinkpink_element57, resize 80%, image, mirror & place to the left on the frame.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used DJ Fiddlesticks. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 28th July 2011, any similarity to any other tutorial is purely coincidental!

♥ They Say I'm Bad ♥

2011-07-27T09:24:00.000+10:00

♥ They Say I'm Bad ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome They Say I'm Bad kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_133 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDtheysayimbad_element22 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open JDtheysayimbad_paper1, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDtheysayimbad_element27, resize 78%, arrange as bottom layer to the left, duplicate, image, mirror.

Copy & paste JDtheysayimbad_element46, resize 65%, arrange to the right.

Copy & paste JDtheysayimbad_element55, resize 30%, arrange to the right over the previous layer.

Copy & paste JDtheysayimbad_element31, resize 60%, place near the bottom.

Copy & paste JDtheysayimbad_element42, resize 60%, place to the left.

Copy & paste JDtheysayimbad_element44, resize 40%, image, mirror & arrange to the left.

Copy & paste JDweallloveemo_element20, resize 30%, arrange to the left.

Copy & paste JDweallloveemo_element38, resize 35%, place to the lower left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Do I Like Stripes. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 27th July 2011, any similarity to any other tutorial is purely coincidental!

♥ Aloha Girl ♥

2011-06-30T09:30:00.000+10:00

♥ Aloha Girl ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Aloha Summer kit by Rieka_Rafita, you can purchase here, thankyou!

WSL_119 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frames2 as new layer. Resize 78%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RR_Paper10, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_CoconatTree, resize 70%, arrange to the right.

Copy & paste RR_Beachball, resize 25%, place to the top of frame.

Copy & paste RR_Tikimask, resize 35%, arrange to the bottom right.

Copy & paste RR_Sand, arrange at the bottom of frame.

Copy & paste RR_Board, resize 80%, place to the right.

Copy & paste RR_Ribbon2, resize 40%, arrange to the bottom.

Copy & paste RR_Umbrella, resize 65%, place to the left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Do I Like Stripes. I also added spme words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 30th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Rieka's New Store ♥

2011-06-29T13:12:00.002+10:00

Rieka is having 50% OFF sale on there now &

Got a FREEBIES that you can snag at her store too!!

Don't forget to sign up & subscribe to my Newsletter to get surprise pressie &

Coupon that you can use only at her store!!

Hope you all will enjoy your stay with Rieka!

Happy Shopping everyones!! >.<

♥ Walking On Sunshine ♥

2011-06-26T10:05:00.000+10:00

♥ Walking On Sunshine ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Dean Yeagle, I purchased my tubes through CILM,

these tubes are no longer available there but are available at the CDO Store,

if you would like to use this work, please visit here.

Awesome Walking On Sunshine kit by Sweet Cravings Scraps, you can purchase it here, thankyou!

WSL_56 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SCS_WalkingOnSunshine_Frame5 as new layer. Resize 65%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open SCS_WalkingOnSunshine_Paper13, resize 55%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SCS_WalkingOnSunshine_PalmTree, resize 58%. Image, mirror & place to the left.

Copy & paste SCS_WalkingOnSunshine_Chair1, resize 40%, arrange in the middle, behind your tube & boat.

Copy & paste SCS_WalkingOnSunshine_Sun, resize 40%, arrange to the top right.

Copy & paste SCS_WalkingOnSunshine_BeachHouse, resize 45%, arrange to the right.

Copy & paste SCS_WalkingOnSunshine_CuteFish, resize 25%, place in the centre.

Copy & paste SCS_WalkingOnSunshine_CuteCrab, resize 28%, arrange to the bottom left.

Copy & paste SCS_WalkingOnSunshine_Radio, resize 45%, place to the bottom right.

Copy & paste SCS_WalkingOnSunshine_Surfboard1, resize 60%, arrange to the left.

Copy & paste SCS_WalkingOnSunshine_SwimTube, resize 30%, place to the left.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Doodle Love Letters. I also added some words and gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 26th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Emo Girl ♥

2011-06-25T10:03:00.000+10:00

♥ Emo Girl ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Lady Mishka, I purchased my tube through PTE,

these tubes are no longer available there but are available here at SATC.

Awesome We All Love Emo kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_312 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDweallloveemo_element14 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 3.

Open JDweallloveemo_paper15, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDweallloveemo_element15, resize 75%, arrange to the right.

Copy & paste JDweallloveemo_element61, arrange in the centre of frame.

Copy & paste JDweallloveemo_element7, resize 20%, arrange to the left over the previous layer, duplicate, image, mirror.

Copy & paste JDweallloveemo_element23, place behind your tube.

Copy & paste JDweallloveemo_element25, place to the top right, duplicate, image, flip, mirror.

Copy & paste JDweallloveemo_element65, resize 35%, arrange to the left.

Copy & paste JDweallloveemo_element20, resize 30%, arrange to the left.

Copy & paste JDweallloveemo_element38, resize 35%, place to the lower left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Thwart. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 25th June 2011, any similarity to any other tutorial is purely coincidental!

♥ When I Look At You ♥

2011-06-24T11:26:00.001+10:00

♥ When I Look At You ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Such A Delight kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_302 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDsuchadelight_element62 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 3.

Open RDsunchadelight_paper8, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste a close-up/tubes of your choice, arrange below frame but above the paper, I changed the blend mode to luminance.

Copy & paste RDsuchadelight_element14, resize 50%, arrange to the bottom left.

Copy & paste RDsuchadelight_element10, resize 60%, place to the right, duplicate, image, mirror.

Copy & paste RDsuchadelight_element8, resize 45%, arrange lower right.

Copy & paste RDsuchadelight_element3, resize 35%, arrange to the lower left.

Copy & paste RDsuchadelight_element33, arrange to the left, behind your tube.

Copy & paste RDsuchadelight_element73, arrange to the top of frame.

Copy & paste RDsuchadelight_element1, resize 60%, arrange to the left of frame, duplicate, image, mirror.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Beau Rivage Two. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 24th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Sweet Babe ♥

2011-06-21T11:07:00.001+10:00

♥ Sweet Babe ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Sweet Sense kit by Joy Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_259 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste JDsweetsense_element6 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 3.

Open JDsweetsense_paper16, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste JDsweetsense_element41, resize 85%, arrange over the 1st frame, behind your tube.

Copy & paste JDsweetsense_element34, resize 40%, place to the left, duplicate, image.mirror, arrange on the right.

Copy & paste JDsweetsense_element49, resize 75%, arrange to the left as bottom layer, duplicate, image, mirror, flip.

Copy & paste JDsweetsense_element8, resize 20%, arrange to the right.

Copy & paste JDsweetsense_element22, resize 75%, place to the top of frame.

Copy & paste JDsweetsense_element44, resize 60%, arrange under your bow.

Copy & paste JDsweetsense_element31, resize 30%, image, mirror, arrange to the left near flowers.

Copy & paste JDsweetsense_element32, resize 30%, place to the lower left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used DJ Fiddlesticks. I also added some words & a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 21st June 2011, any similarity to any other tutorial is purely coincidental!

♥ Magical Dreamz ♥

2011-06-19T09:02:00.000+10:00

♥ Magical Dreamz ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Magical Dreams kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_33 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDmagicaldreams_element92 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 3.

Open RDmagicaldreams_papers6, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDmagicaldreams_element4, arrange over the frame to the top right.

Copy & paste RDmagicaldreams_element32, resize 28%, place to the top right of frame.

Copy & paste RDmagicaldreams_element19, resize 15%, arrange near the moon.

Copy & paste RDmagicaldreams_element103, resize 40%, arrange to the top of frame.

Copy & paste RDmagicaldreams_element71, make bottom layer.

Copy & paste RDmagicaldreams_element31, resize 50%, arrange to the bottom right.

Copy & paste RDmagicaldreams_element108, resize 78%, arrange to bottom right of frame, duplicate, image, flip.

Copy & paste RDmagicaldreams_element69, resize 80%, place to the left of frame.

Copy & paste RDmagicaldreams_element15, resize 45%, arrange to bottom left. Duplicate, image, mirror & place to top left.

Cpy & paste RDmagicaldreams_element13, resize 40%, image, mirror, place bottom right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Do I Like Stripes. I also added some words & a grdient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 19th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Burning Desire ♥

2011-06-18T10:10:00.000+10:00

♥ Burning Desire ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Joyful Spring taggers kit by Stefs Scrapkits, you can purchase it here, thankyou!

WSL_84 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste Frame01_JoyfulSpring_Stef'sScrapkits as new layer. Resize 60%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open Paper02_JoyfulSpring_Stef'sScrapkits, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Copy & paste Frame02_JoyfulSpring_Stef'sScrapkits, resize 65%, make bottom layer, behind your previous frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste a close-up/tubes of your choice, arrange below frame but above the paper, I changed the blend mode to luminance.

Copy & paste Bow06_JoyfulSpring_Stef'sScrapkits, resize 45%, arrange to the left.

Copy & paste Bow03_JoyfulSpring_Stef'sScrapkits, resize 50%, image, mirror & place above previous element.

Copy & paste Button02_JoyfulSpring_Stef'sScrapkits, resize 15%, arrange in the centre of bow.

Copy & paste Button01_JoyfulSpring_Stef'sScrapkits, resize 13%, place above previous button.

Copy & paste Beachball01_SummerFun_Stef'sScrapkits, resize 22%, arrange behind your tube to the right.

Copy & paste Flower03_JoyfulSpring_Stef'sScrapkits, resize 40%, arrange to the right.

Copy & paste Butterfly_JoyfulSpring_Stef'sScrapkits, resize 16%, place near the flowers.

Copy & paste Birdie_JoyfulSpring_Stef'sScrapkits, resize 20%, arrange to lower left of frame.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used DJ Fiddlesticks. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 18th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Summer Breeze ♥

2011-06-16T14:35:00.001+10:00

♥ Summer Breeze ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Summer Breeze kit by Rieka_Rafita, you can purchase here, thankyou!

RR_Mask1 mask by Rieka_Rafita here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR-_Frame1 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RR_Paper10, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste a close-up/tubes of your choice, arrange below frame but above the paper, I changed the blend mode to luminance.

Copy & paste RR_GlitterSplash, arrange as bottom layer.

Copy & paste RR_WordArt1, resize 50%, place to the top of frame.

Copy & paste RR_PalmTree, resize 80%, arrange as bottom layer.

Copy & paste RR_Scuba, resize 50%, arrange at the bottom of frame.

Copy & paste RR_Towel, resize 40%, place to the bottom again.

Copy & paste RR_Sand, arrange as the bottom layer under your tube.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Copperplate Gothic. I also added a gradient glow.

Add correct © info, crop & resize if needed. Save as a png.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 16th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Strawberry Wine ♥

2011-06-10T11:06:00.000+10:00

♥ Strawberry Wine ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Keith Garvey, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Strawberry Wine kit by Rieka_Rafita, you can download here, thankyou!

WSL_337 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frame1 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 3.

Open RR_Paper8, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Copy & paste RR_Frame2, resize 80%, bring this layer below the 2 previous layers.

Select none & bring this paper layer below your frame.

Copy & paste a close-up/tubes of your choice, arrange below frame but above the paper, I changed the blend mode to luminance.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_Glitter1, resize 90%, make bottom layer.

Copy & paste RR_Flower2, resize 40%, arrange to the top left corner, duplicate, image mirror, arrange on the right.

Copy & paste RR_Sparkle, resize 80%, arrange behind your main tube.

Copy & paste RR_Heart, resize 35%,place to the top of frame.

Copy & paste RR_Ribbon2, resize 40%, arrange to top right corner.

Copy & paste RR_Strawberry3, resize 30%, arrange to the lower left, duplicate, image mirror..

Copy & paste RR_Brad1, resize 50%, arrange to the right.

Copy & paste RR_Butterfly, resize 30%, image, rotate, left, 25 & place to the left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used DJ Fiddlesticks. I added some words and a gradient glow too.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 10th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Summer Time ♥

2011-06-10T09:48:00.000+10:00

♥ Summer Time ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Summer Fun taggers kit by Stefs Scrapkits, you can purchase it here, thankyou!

WSL_302 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste Frame03_SummerFun_Stef'sScrapkits as new layer. Resize 42%.

Using your selection tool, select inside of frame, selections, modify, expand 4.

Open Paper07_SummerFun_Stef'sScrapkits, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste Island02_SummerFun_Stef'sScrapkits, resize 45%, arrange to the left.

Copy & paste Beachsign_SummerFun_Stef'sScrapkits, resize 20%, place along top of frame.

Copy & paste Umbrella02_SummerFun_Stef'sScrapkits, resize 50%, arrange to the right.

Copy & paste Flower07_SummerFun_Stef'sScrapkits & Flower06_SummerFun_Stef'sScrapkits, resize 15%, duplicate & place along the right side of frame.

Copy & paste Beachball01_SummerFun_Stef'sScrapkits, resize 22%, arrange behind your tube to the right.

Copy & paste Surfboard01_SummerFun_Stef'sScrapkits, resize 50%, arrange behind previous layer.

Copy & paste Wordart04_SummerFun_Stef'sScrapkits, resize 40%, place where you think looks best.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used A & S Snapper Script. I also added a gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 10th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Down In The Valley ♥

2011-06-08T18:59:00.000+10:00

♥ Down In The Valley ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome In The Valley kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_33 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDinthevalley_element84 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDinthevalley_paper3, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDinthevalley_element4, resize 50%, arrange to the lower left.

Copy & paste RDinthevalley_element7, resize 60%, place to lower right of frame.

Copy & paste RDinthevalley_element2, resize 83%, image, mirror, arrange along top of frame.

Copy & paste RDinthevalley_element35, arrange behind your tube but above frame.

Copy & paste RDinthevalley_element85, resize 70%, arrange to the right.

Copy & paste RDinthevalley_element37, arrange behind tube.

Copy & paste RDinthevalley_element68, resize 14%, arrange near the bird house.

Copy & paste RDinthevalley_element32, resize 80%, place to the left behind the mushrooms.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Frosty. I also added some words & a grdient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 8th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Sweet As Candy ♥

2011-06-08T17:44:00.000+10:00

♥ Sweet As Candy ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Sweet As Candy kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_208 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDsweetascandy_element69 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDsweetascandy_papers8, resize 55%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDsweetascandy_element21, resize 50%, arrange to the lower left, duplicate, image, mirror.

Copy & paste RDsweetascandy_element29, resize 50%, place behind previous layer on the left, duplicate, image, mirror.

Copy & paste RDsweetascandy_element28, resize 60%, arrange behind your tube.

Copy & paste RDsweetascandy_element98, arrange as bottom layer.

Copy & paste RDsweetascandy_element4, resize 35%, arrange to the right.

Copy & paste RDsweetascandy_element26, resize 40%, arrange to the left.

Copy & paste RDsweetascandy_element71, resize 80%, arrange to the bottom.

Copy & paste RDsweetascandy_element81, resize 22%, place near flowers on the left, duplicate, image, mirror & arrange to the right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Do I Like Stripes. I also added some words & a grdient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 8th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Believe In Dreams ♥

2011-06-05T20:15:00.000+10:00

♥ Believe In Dreams ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Believe In Dreams taggers kit by Cinnamon Scraps, you can download it here at her blog, thankyou!

WSL_209 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste CS_believeindreams_element42 as new layer. Resize 72%.

Using your selection tool, select inside of frame, selections, modify, expand 4.

Open CS_believeindreams_paper10, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste CS_believeindreams_element18, resize 40%, arrange to the left.

Copy & paste CS_believeindreams_element37, resize 65%, place below previous layer.

Copy & paste CS_believeindreams_element36, resize 35%, arrange near flower layer.

Copy & paste CS_believeindreams_element11, resize 58%, place in the centre of frame.

Copy & paste CS_believeindreams_element12, arrange behind your tube to the top right.

Copy & paste CS_believeindreams_element16, resize 40%, arrange behind your tube.

Copy & paste CS_believeindreams_element31, resize 60%, place to the right.

Copy & paste CS_believeindreams_element4, resize 60%, image, mirror & place to the lower right.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Do I Like Stripes. I also added a gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 5th June 2011, any similarity to any other tutorial is purely coincidental!

♥ Another Day In Paradise ♥

2011-06-02T11:59:00.000+10:00

♥ Another Day In Paradise ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Summer Breeze kit by Sweet Cravings Scraps, you can purchase it here, thankyou!

WSL_180 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SCS_SummerBreeze_Frame4 as new layer. Resize 62%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open SCS_SummerBreeze_Paper6, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SCS_SummerBreeze_Boat, resize 50%. Place to the left.

Copy & paste SCS_SummerBreeze_BeachFence, resize 80%, arrange in the middle, behind your tube & boat.

Copy & paste SCS_SummerBreeze_PalmTree, resize 60%, arrange to the left.

Copy & paste SCS_SummerBreeze_FishingNet, resize 65%, arrange near top of frame.

Copy & paste SCS_SummerBreeze_LifeFloat, resize 22%, place behind the boat.

Copy & paste SCS_SummerBreeze_Oar, resize 60%, image, mirror, arrange to the bottom near the boat.

Copy & paste SCS_SummerBreeze_Frame1, resize 55%, arrange to the top of frame, using your selection tool, select inside of frame, selections, modify, expand 2, copy & paste tubes of choice, selections, invert & hit delete on your keyboard for each. Makie sure these tube layers are below the frame.

Copy & paste SCS_SummerBreeze_OceanBird1, resize 20%, iamge, mirror & place on boat.

Copy & paste SCS_SummerBreeze_SeaShell3, resize 28%, arrange behind boat, duplicate, image, mirror.

Copy & paste SCS_SummerBreeze_Bow6, resize 30%, place at top of frame.

Copy & paste SCS_SummerBreeze_Kelp2, resize 60%, place above the paper layer but below frame, in the center.

Copy & paste SCS_SummerBreeze_Sign, resize 50%, image, mirror & arrange to the left.

Copy & paste SCS_SummerBreeze_SeaShells, arrange to the top as bottom layer, duplicate, image flip & fix so you can see it at the bottom as frame as well.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Al Charisma. I also added some words and gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 2nd June 2011, any similarity to any other tutorial is purely coincidental!

♥ Music Is ♥

2011-06-02T10:18:00.000+10:00

♥ Music Is ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Fresh Breeze kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_169 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDfreshbreeze_element12 as new layer. Resize 80%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDfreshbreeze_paper12, resize 55%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDfreshbreeze_element81, resize 60%, arrange to the top right.

Copy & paste RDfreshbreeze_element21, resize 78%, arrange to the left.

Copy & paste RDfreshbreeze_element7, resize 60%, arrange below previous layer.

Copy & paste RDfreshbreeze_element23, resize 30%, place in lower left corner above the 2 previous layers.

Copy & paste RDfreshbreeze_element13, arrange to the right under your tube.

Copy & paste RDfreshbreeze_element31, resize 65%, arrange to the left, duplicate, image, mirror, place to the right.

Copy & paste RDfreshbreeze_element6, resize 30%, arrange to the right, duplicate & place above the other flower.

Copy & paste RDfreshbreeze_element9, resize 22%, place near flowers on the right, duplicate, imag, mirror & arrange to the left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Al Professor. I also added some words & a grdient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 2nd June 2011, any similarity to any other tutorial is purely coincidental!

♥ Rebelicious ♥

2011-06-01T14:21:00.000+10:00

♥ Rebelicious ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Lady Mishka, I purchased my tube through PTE,

these tubes are no longer available there but are available here at SATC.

Awesome Rebelicious kit by Rieka_Rafita, you can purchase here, thankyou!

RR_Mask5 mask by Rieka_Rafita here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frames3 as new layer. Resize 75%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RR_Paper20, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_BottleCap, resize 40%, place to the top right.

Copy & paste RR_LoveString, resize 65%, place under previous layer.

Copy & paste RR_Glitter, arrange as bottom layer.

Copy & paste RR_FlagBanner, arrange along the top of the frame, erase any overhang.

Copy & paste RR_Bow4, resize 50%, image, mirror & place to the top left.

Copy & paste RR_Flame, arrange as the bottom layer to the left, duplicate, image, mirror.

Copy & paste RR_Lolipop, resize 60%, arrange to the left. Image, rotate, left, 25.

Copy & paste RR_SkullString1, resize 80%, place behind your tube at the bottom.

Copy & paste RR_Sparkle2, arrange below previous layer.

Copy & paste RR_Skull3, resize 40%, arrange in lower left corner of frame.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used New Romantics. I added a gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 1st June 2011, any similarity to any other tutorial is purely coincidental!

♥ Faeire Dreams ♥

2011-06-01T12:40:00.000+10:00

♥ Faerie Dreams ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Caron Vinson, I purchased my tubes through CILM,

these tubes are no longer available there but are available here at the CDO Store.

Awesome Could've Been kit by Sweet Cravings Scraps, you can purchase it here, thankyou!

WSL_209 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SCS_Could'veBeen_Frame5 as new layer. Resize 55%.

Copy & paste SCS_Could'veBeen_Frame2 as new layer, resize 65% & place over the other frame.

Using your selection tool, select inside of 1st frame, selections, modify, expand 10.

Open SCS_Could'veBeen_Paper5, resize 50%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SCS_Could'veBeen_FairyLogHouse, resize 50%. Place to the left.

Copy & paste SCS_Could'veBeen_Bridge, resize 50%, arrange in the middle.

Copy & paste SCS_Could'veBeen_FairyGlitter2, resize 80%, arrange to the lower left as bottom layer, duplicate, image, mirror, image, flip.

Copy & paste SCS_Could'veBeen_FlowerSwag, resize 70%, arrange near top of frame.

Copy & paste SCS_Could'veBeen_Bow2, resize 50%, place at top.

Copy & paste SCS_Could'veBeen_Fence, resize 60%, arrange to the bottom so it looks as though your tube is sitting on top.

Copy & paste SCS_Could'veBeen_Sunburst, resize 40%, arrange to the left.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Curlz. I also added some words and gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 1st June 2011, any similarity to any other tutorial is purely coincidental!

♥ Only In My Dreams ♥

2011-05-28T08:38:00.000+10:00

♥ Only In My Dreams ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Only In My Dreams kit by Sweet Cravings Scraps, you can purchase it here, thankyou!

WSL_214 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SCS_OnlyInMyDreams_Frame3 as new layer. Resize 60%.

Copy & paste SCS_OnlyInMyDreams_Frame1 as new layer, resize 65% & place over the other frame.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open SCS_OnlyInMyDreams_Paper4, resize 55%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SCS_OnlyInMyDreams_Flower4. Resize 60%, place to the lower right of frame.

Copy & paste SCS_OnlyInMyDreams_Bow3, resize 45%, arrange to the top right.

Copy & paste SCS_OnlyInMyDreams_FlowerSwag, resize 60%, arrange to the lower left of frame.

Copy & paste SCS_OnlyInMyDreams_Castle, resize 40%, arrange above the paper but below all other layers.

Copy & paste SCS_OnlyInMyDreams_Cloud3, resize 20%, place near the castle.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used p22 Corinthia. I also added a gradient glow & some words.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 28th May 2011, any similarity to any other tutorial is purely coincidental!

♥ Ahoy There Matey ♥

2011-05-27T10:33:00.000+10:00

♥ Ahoy There Matey ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Pirates Of The Carribean kit by Rieka_Rafita, you can purchase here, thankyou!

WSL_220 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frame3 as new layer. Resize 78%.

Using your selection tool, select inside of frame, selections, modify, expand 10.

Open RR_Paper1, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_PalmTree, image, mirror, resize 75%, place to the right.

Copy & paste RR_Coin2, arrange under frame to the left, duplicate, image, flip & arrange to the right.

Copy & paste RR_CoinBox1, resize 50%, image, mirror & place to the right.

Copy & paste RR_Ship, resize 30%, arrange in the middle of frame.

Copy & paste RR_Wood, resize 60%, arrange along the bottom of frame.

Copy & paste RR_Barrel2, resize 40%, arrange behind the treasure chest on the right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Dreamed About Me. I added some words & a gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 27th May 2011, any similarity to any other tutorial is purely coincidental!

♥ Paradise Beach ♥

2011-05-24T18:35:00.000+10:00

♥ Paradise Beach ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Pelican Beach kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_12 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDpelicanbeach_element93 as new layer. Resize 87%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDpelicanbeach_paper5, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDpelicanbeach_element8, resize 80%, rotate, left, 25.00, arrange to the left, behind your tube.

Copy & paste RDpelicanbeach_element22, resize 22%, arrange above the paper layer.

Copy & paste RDpelicanbeach_element28, resize 90%, place above frame layer.

Copy & paste RDpelicanbeach_element201, resize 60%, arrange to the right.

Copy & paste RDpelicanbeach_element50, resize 22%, image, mirror, place near previous layer.

Copy & paste RDpelicanbeach_element24, resize 80%, arrange to the left behind your tube, duplicate, image, mirror.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Monte Carlo Script. I also added some words & a grdient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 24th May 2011, any similarity to any other tutorial is purely coincidental!

♥ Black Beauty ♥

2011-05-24T16:52:00.001+10:00

♥ Black Beauty ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Black Swan kit by Rieka_Rafita, you can purchase here, thankyou!

RR_Mask4 mask by Rieka_Rafita here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frame2 as new layer. Resize 75%.

Using your selection tool, select inside of frame, selections, modify, expand 20.

Open RR_Paper9, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Copy & paste a close-up/tubes of your choice, arrange below frame but above the paper, i changed the blend mode to luminance.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_Doodle, arrange to the left under frame but above paper..

Copy & paste RR_Bow4, resize 60%, arrange to the left.

Copy & paste RR_Sparkle2, arrange behind frame.

Copy & paste RR_FeatherFan, place as bottom layer behind your main tube.

Copy & paste RR_FlowerLeaves, resize 60%, arrange to the right, duplicate & place to the left.

Copy & paste RR_FloralVine, arrange in the centre of frame.

Copy & paste RR_Butterfly, resize 30%, duplicate & place around the frame a few times.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Miss Lankfort. I added a gradient glow & some words.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 24th May 2011, any similarity to any other tutorial is purely coincidental!

♥ Dark Midnight ♥

2011-05-24T12:14:00.000+10:00

♥ Dark Midnight ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Keith Garvey, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome In The Still Of The Night kit by Sweet Cravings Scraps, you can purchase it here, thankyou!

WSL_116 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SCS_HoneyBee_Frame9 as new layer. Rotate, left 90. Resize 60%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open SCS_ITSOTN_Paper1, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Copy & paste a close-up/tubes of your choice, arrange below frame but above the paper, I changed the blend mode to luminance.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SCS_ITSOTN_ChainFence1, rotate 45 right, make bottom layer. Resize 85%. Duplicate, image mirror & arrange the frame as bottom layers.

Copy & paste SCS_ITSOTN_Bow3, resize 45%, arrange to the top left. Duplicate, image, mirror.

Copy & paste SCS_ITSOTN_Bow1, resize 35%, arrange above previous bow, duplicate, image, mirror.

Copy & paste SCS_ITSOTN_Flower8, resize 40%, image, mirror, arrange to the lower right.

Copy & paste SCS_ITSOTN_Butterfly, resize 25%, image, mirror, arrange near previous layer.

Copy & paste SCS_ITSOTN_Lightning, resize 50%, place behind tube. Duplicate, image mirror.

Copy & paste SCS_ITSOTN_NightCat, resize 25%, arrange to the lower left.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used International Palms. I also added a gradient glow & some words using Irreversible.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 24th May 2011, any similarity to any other tutorial is purely coincidental!

♥ Be Aware ♥

2011-05-22T09:20:00.000+10:00

♥ Be Aware ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Breast Cancer Awareness kit by Rieka_Rafita, you can download here, thankyou!

RR_Mask6 mask by Rieka_Rafita here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frames1 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 15.

Open RR_Paper6, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_Glitter1, arrange to the bottom. Duplicate, image, mirror so it shows on both sides of the frame. Repeat this step for RR_Glitter2.

Copy & paste RR_Wordart3, resize 80%, arrange to the bottom.

Copy & paste RR_Sparkle1, arrange behind your tube.

Copy & paste RR_AlphaHeart, resize 60%, arrange to the left.

Copy & paste RR_Bow1, resize 45%, place above the previous layer.

Copy & paste RR_DiamondString, arrange as bottom layer to the right, duplicate, image, flip, mirror & arrange to the left.

Copy & paste RR_Flower3, resize 60%, place to lower right.

Copy & paste RR_Butterfly2, resize 35%, image, mirror, arrange near flower.

Copy & paste RR_AwarenessRibbon1, resize 40%, place in top right corner.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Dala. I also added a gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 22nd May 2011, any similarity to any other tutorial is purely coincidental!

♥ Friends Are Family ♥

2011-05-22T08:34:00.000+10:00

♥ Friends Are Family ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Best Family Friends kit by Rieka_Rafita, you can download here, thankyou!

RR_Mask2 mask by Rieka_Rafita here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frame2 as new layer. Resize 75%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RR_Paper15, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_HeartDoodle, resize 80%, make bottom layer. Duplicate, image, mirror.

Copy & paste RR_HeartCharm, resize 60%, arrange under to the top right.

Copy & paste RR_Wordart1, resize 60%, arrange to the bottom.

Copy & paste RR_GlitterHearts1, resize 60%, arrange as bottom layer to the lower right, duplicate, image, mirror, arrange to the left.

Copy & paste RR_Sparkle, arrange behind your tube.

Copy & paste RR_Butterfly2, resize 30%, place to the right. Duplictae & arrange to the left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used CAC Pinafore. I added some words & added a gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 22nd May 2011, any similarity to any other tutorial is purely coincidental!

♥ Sweet Treats ♥

2011-05-22T08:32:00.000+10:00

♥ Sweet Treats ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Ice Cream Dream kit by Rieka_Rafita, you can download here, thankyou!

RR_Mask8 mask by Rieka_Rafita here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frame1 as new layer. Resize 75%.

Copy & paste RR_Frame2 as new layer, resize 70% & arrange above frame 1.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RR_Paper5, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_BananaIceCream, resize 50%, arrange to the lower right.

Copy & paste RR_Bow1, resize 50%, arrange to the top right.

Copy & paste RR_Sparkle, arrange behind your tube.

Copy & paste RR_Wordart1, resize 50%, arrange to the bottom.

Copy & paste RR_IceCream2, resize 60%, arrange behind your tube.

Copy & paste RR_Lolipop1, resize 60%, image, mirror & place to the right.

Copy & paste RR_Sprinkle1, arrange as bottom layer.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Rendezvous. I also added a gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 22nd May 2011, any similarity to any other tutorial is purely coincidental!

♥ Walking On Sunshine ♥

2011-05-22T08:27:00.000+10:00

♥ Walking On Sunshine ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, I purchased my tubes through MPT,

these tubes are no longer available there but are available here at PSP Tubes Emporium.

Awesome Walking On Sunshine kit by Rieka_Rafita, you can download here, thankyou!

RR_Mask4 mask by Rieka_Rafita here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frames4 as new layer. Resize 90%.

Using your selection tool, select inside of frame, selections, modify, expand 15.

Open RR_Paper6, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_DiamondFlowerSprinkle1, arrange to the bottom. Duplicate, image, mirror so it shows on both sides of the frame.

Copy & paste RR_Bow1, resize 50%, image, mirror & place to the left.

Copy & paste RR_Button1, resize 32%, arrange on top of previous layer.

Copy & paste RR_FlowerKeychain1, resize 55%, arrange to the right.

Copy & paste RR_Flower2, resize 30%, place above the keychain on the right.

Copy & paste RR_Chair, resize 90%, arrange behind your tube.

Copy & paste RR_Pepples, arrange as bottom layer so you can see it at the bottom of the frame.

Copy & paste RR_Bee, resize 30%, place near the flower.

Copy & paste RR_Sun, resize 30% and arrange to top left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Dadhand. I also added a gradient glow & some words.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 22nd May 2011, any similarity to any other tutorial is purely coincidental!

♥ Precious Memories ♥

2011-05-18T16:42:00.001+10:00

♥ Precious Memories ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Joel Adams, I purchased my tubes through CILM,

these tubes are no longer available there but are available here at the CDO Store.

Awesome Memories To Remember kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_308 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDmemoriestoremember_element69 as new layer. Resize 85%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDmemoriestoremember_paper12, resize 60%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RDmemoriestoremember_element36, resize 80%, arrange to bottom of frame. Duplicate, image mirror.

Copy & paste RDmemoriestoremember_element33, resize 80%, arrange behind your tube.

Copy & paste RDmemoriestoremember_element3, place in top left corner, duplicate, image, mirror.

Copy & paste RDmemoriestoremember_element32, resize 65%, arrange as bottom layer to the left, duplicate, image, mirror. Keep duplicating the leaves so you have enough to go around the whole frame.

Copy & paste RDmemoriestoremember_element82, resize 25%, arrange to the left.

Copy & paste RDmemoriestoremember_element35, resize 22%, arrange near previous layer.

Copy & paste RDmemoriestoremember_element79, resize 22%, place to the right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Arizona. I also added some words & a gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 18th May 2011, any similarity to any other tutorial is purely coincidental!

♥ Lazy Dayz ♥

2011-05-18T15:07:00.001+10:00

♥ Lazy Dayz ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome A Birds Garden kit by Rieneke Designs, you can purchase here at Twilight Scraps, thankyou!

WSL_325 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RDabirdsgarden_element41 as new layer. Resize 78%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open RDabirdsgarden_paper6, resize 58%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

I also added a close-up of my tube, below the frame, above the paper layer 7 reduced the opacity to 50%. Erase any overhang.

Copy & paste RDabirdsgarden_element7, resize80%, arrange to lower right. Duplicate, image, mirror, flip.

Copy & paste RDabirdsgarden_element37, make bottom layer.

Copy & paste RDabirdsgarden_element39, place behind your tube.

Copy & paste RDabirdsgarden_element68, place above previous layer.

Copy & paste RDabirdsgarden_element54, resize 40%, arrange to the top right.

Copy & paste RDabirdsgarden_element78, resize 70%, image, arrange along the bottom under your tube.

Copy & paste RDabirdsgarden_element92, resize 30%, place above the previous.

Copy & paste RDabirdsgarden_element55, resize 60%, arrange to the left.

Copy & paste RDabirdsgarden_element103, place under previous layer on the left, duplicate & arrange to the right.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used P22 Corinthia. I also added some words & a gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 18th May 2011, any similarity to any other tutorial is purely coincidental!

♥ Spring Is Coming ♥

2011-05-17T11:45:00.001+10:00

♥ Spring Is Coming ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Caron Vinson, I purchased my tubes through CILM,

these tubes are no longer available there but are available here at the CDO Store.

Awesome Spring Day kit by Just Us Dreamers Designs, you can purchase here at Bear Necessities, thankyou!

WSL_302 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste jud_sd_el25 as new layer. Resize 20%. Image, rotate, right, 90.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open jud_sd_pp07, resize 13%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste jud_sd_el05, resize 8%, place to the left, duplicate, image mirror.

Copy & paste jud_sd_el35, resize 30%, place as bottom layer, duplicate, image, flip, mirror & make sure both layers can be seen at the top & bottom.

Copy & paste jud_sd_el36, resize 10%, place to top right of frame.

Copy & paste jud_sd_el17, resize 15%, place above previous layer.

Copy & paste jud_sd_el37. Resize 12%, place above the other flower.

Copy & paste jud_sd_el42, resize 18%, arrange to the bottom of frame.

Copy & paste jud_sd_el39, resize 15%, place to the left, duplicate, image, mirror.

Copy & paste jud_sd_el60, resize 12%, image, mirror & place below frame but above paper.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Fmiring Campo Type. I also added some words & gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 17th May 2011, any similarity to any other tutorial is purely coincidental!

♥ Bee Mine ♥

2011-05-17T10:01:00.001+10:00

♥ Bee Mine ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Suzanne Woolcott, if you would like to use her work, please visit here.

Awesome Honey Bee kit by Sweet Cravings Scraps, you can purchase it here, thankyou!

WSL_241 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste SCS_HoneyBee_Frame9 as new layer. Rotate, left 90. Resize 60%.

Using your selection tool, select inside of frame, selections, modify, expand 8.

Open SCS_HoneyBee_Paper1, resize 55%, copy & paste as new layer, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste SCS_HoneyBee_HoneySpill, rotate 90, make bottom layer. Resize 90%.

Copy & paste SCS_HoneyBee_Wheat, resize 60%, arrange to the left.

Copy & paste SCS_HoneyBee_BeeHouse, resize 53%, arrange to the right.

Copy & paste SCS_HoneyBee_BlueBird, resize 18%, arrange near previous layer.

Copy & paste SCS_HoneyBee_Cloud2, resize 50%, place behind tube.

Copy & paste SCS_HoneyBee_CuteBee1, resize 25%, arrange to the lower right.

Copy & paste SCS_HoneyBee_Flower7, resize 65%, arrange to the right.

Copy & paste SCS_HoneyBee_CuteBee2, resize 15%, place to the left.

Copy & paste SCS_HoneyBee_BeeTrail, resize 55%, image, mirror, place to the bottom.

Copy & paste SCS_HoneyBee_Stars, resize 75%, make bottom layer.

Copy & paste SCS_HoneyBee_WordArt1, resize 48%, arrange to the bottom. I added a gradient glow to mine to help it stand out.

Add a new raster layer on the bottom layer, selections, select all, resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Doodle Do. I also added a gradient glow.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 17th May 2011, any similarity to any other tutorial is purely coincidental!

♥ Beware ♥

2011-05-14T21:49:00.000+10:00

♥ Beware ♥

Supplies Needed

PSP X2 (any version will work)

Tube/s of choice, I am using the artwork of Elias Chatzoudis, available here at PSP Tubes Emporium.

Awesome Red Riding Hood kit by Rieka_Rafita, you can purchase here, thankyou!

WSL_219 mask by Weescotslass here, thankyou!

Lets get started.

Open a new canvas 650x650.

Copy & paste RR_Frame2 as new layer. Resize 75%.

Using your selection tool, select inside of frame, selections, modify, expand 20.

Open RR_Paper10, copy & paste as new layer, resize 60%, selections, invert & hit delete on your keyboard.

Select none & bring this paper layer below your frame.

Copy & paste a close-up/tubes of your choice, arrange below frame but above the paper, i changed the blend mode to luminance.

Add your tube/s, doing this now gives you a better idea of placement for your other elements.

Copy & paste RR_CottagePlant, make bottom layer & arrange to the left. Duplicate & place to the right.

Copy & paste RR_Fence, resize 80%, arrange above frame.

Copy & paste RR_HeartSplatter, arrange as bottom layer, duplicate so it can be seen at the top & bottom.

Copy & paste RR_Wordart1, resize 75%, place to the bottom.

Copy & paste RR_Wolf3, resize 35%, arrange to the right.

Copy & paste RR_Sparkle2, arrange above frame.

Copy & paste RR_BloodMoon, resize 30%, place to the top right.

Copy & paste RR_Journaling, resize 50%, arrange behind the wolf.

Copy & paste RR_Rose2, resize 60%, image, mirror & arrange above previous layer.

Sopy & paste RR_Apple, resize 45%, place to the left.

Add a new raster layer on the bottom layer, selections, select all,

resize a paper of choice from the kit and paste into selection, select none.

Apply mask, on your layers pallette merge mask group.

Add any further elements from the kit you like, make it your own or you can use mine as a guide if you wish.

Add dropshadows of choice to each layer if preferred.

Add you name using font of choice, I used Kolker Brush. I added a gradient glow too.

Thankyou for trying my tutorial, hope you enjoyed it ♥♥

Written by Bravej, 14th May 2011, any similarity to any other tutorial is purely coincidental!